Skip to main content

How to make Bootable Pen-drive

By

Today i'm gonna tell you how to make a bootable pendrive.

Steps To Make Bootable Pendrive
Step 1: Insert your pendrive in USB Port
Step 2: Navigate toStart>>Run[OR press Ctrl+R] and type cmd and press Enter to open Command Prompt.|Windows Vista and Windows 7 users will have to navigate to Start>>All Programs>>Accessories>>Right-click onCommandPromptand select Run as Administrator|
Step 3: In Command Prompt type DISKPART
Step 4: The next step is to type LIST DISK and press Enter
Step 5: Observe carefully, you will see Disk 0 normally this is your Hard DiskFind your USB Device number, In my caseDisk 1 is my USB pen drive Please note that Disk 1 may not pen drive in your case, so be careful with this step
Step 6: Now type SELECT Disk1 and press Enter
Step 7: Now type CLEAN and press Enter, this will erase data from Disk 1(in my case) i.e. your Pen Drive.
Step 8: Type Create Partition Primary and press Enter
Step 9: Type Select Partition 1 and press Enter
Step 10: Type Active and press Enter
Step 11: Type Format FS:NTFS Quick and press Enter, this will format your USB Pen Drive.
Step 12: Type Assignand press Enter
Step 13: Now, finally type Exit and press Enter
Step 14:Now copy the windows files to your pendrive. That's done!!!Now bootable pendrive with windows operating system is ready to install.

Comments

Post a Comment

Popular posts from this blog

How To Activate Autodesk Autocad 2013 .....

By
1.Install Autodesk Autocad 2013 2.Use as Serial 666-69696969, 667-98989898, 400-45454545 066-66666666 ..    or anything matching those templates 3.Use as Product Key 001E1 4.Finish the installation & restart Autodesk Product 5.Before clicking on Activate   You have 2 options :    - a) Disable Your network Card, pull the network cable out or block with firewall      (this is just to disable online serial check) OR    - b) Click on Activate and it will tell you that your serial is wrong, simply click      on close and click on activate again. Choose option a or b. 6. Select I have an activation code from Autodesk   7.Once at the activation screen:   start XFORCE Keygen 32bits version or 64bits version 8.Click on Mem Patch (you should see successfully patched) 9.Copy the request code into the keygen and press generate 10.Now copy the activation code back to the activation screen and ...
Post a Comment
Read more

How to activate IDM :-

By
1. Download and Install the latest version IDM and open it. 2. Navigate to  "C:\Windows\System32\drivers\etc" on your computer. 3. In the "etc" folder you will find a file with name "hosts" 4. Now right click on the Hosts file and choose "properties" and Navigate to "security" tab on the property window. Also Check: How to enable/Disable Missing Security tab in Windows XP and 7 5. Now click on "Advanced" and Navigate to "owner" tab on the Advanced Security Option. 6. Click on "edit". 7. A new window will be opened. There you will find a table asking for "change Owner to". Now change there to your local user on which you logged on. 8. Below that you will find an check box "replace owner on sub containers and objects". 9. Just tick the check box. 10. Now apply all the modified setting. During apply the changes it will show an message "You dont have the permission to read th...
Post a Comment
Read more